- This is DIY Kit which need you Assembled it by yourself. (include 2×PCB and components.)
- Lower distortion, better control and resolution
- Single differential input, single-ended voltage amplifier stage, three-stage inverted Darlington output.
- The output stage uses the original KTB817, KTD1047
- PHILIPS KEC transistor, ST, EVOX producing CBB capacitor.KEMET, TDK monolithic capacitors.
Specifications:
Supply Voltage: ±15V to ±45V
Output Power: 100W 8Ω (+ – 42V)
Voltage Gain GAIN: 34times
Input Sensitivity: 1.2V100W RMS 8 Europe
SNR: More than 98DB
Distortion: <0.009 THD 1K HZ 10W
Output Stage quiescent current per channel IQ Approximately 30MA
PCB Dimension: 76 * 73 mm / 2.99 * 2.87 in
Please Note:
NO SCHEMATIC AND INSTRUCTION (components values have been marked on the PCB) COME WITH THE ITEM.
649 669 must be installed on the matching radiator, After installation does not require any adjustment, the quiescent current of each transistor about 30MA. This version does not need Jump Wire.
Package Includes:
2PCS/1Set DIY Kit
Leave a Reply